The standard system features multiple DVI-U input modules (allowing any of HDMI, DVI, Composite Video, YC, YUV, YPbPr or RGB) that can be scaled and switched between, along with two independent processing channels. The system can also have 3G-SDI input/output modules fitted, as well as audio I/O.

The high resolution DVI-U (HDMI, DVI, CV, YC, YUV, YPbPr or RGB) outputs are selectable as virtually any PC or HDTV resolution (or SDI with the 3G-SDI I/O module). Our exclusive AutoSet feature takes the hassle out of setup by automatically sizing and positioning the computer image to fit exactly on the video screen. NTSC, PAL, PAL-M, PAL-N, SECAM standards are supported.

In Switcher mode, transitions include Cross-fade, Push, Wipe and Cut. Independent mode gives two channels of video conversion. Dual PIP mode allows two windows to appear together on the same output. All modes allow Background sources to be used along with Keying and Logo insertion.

Signal parameters of the incoming video may be adjusted. All settings are stored in non-volatile memory and are retained even when power is switched off. User defined presets are also available to customize settings for various applications.

All the functions can be controlled via the front panel Push Buttons, an RS-232/422/485 or IP connection. Windows Control Panel software is provided and most third party control systems interface directly with the entire C2 range of products. A front panel LCD makes setup easy. The unit is housed in a standard 1U rack mount case and features an optional redundant internal PSU and power inlet.

Variable Zoom to 10X enlarges any part of the computer screen to fill the entire video screen and position controls allow movement to any area desired. Variable Shrink to as little as 10% allows fitting the image onto most displays. The advanced Digital Flicker Elimination circuitry and high sampling rate ensures crisp, clear images, while full bandwidth chroma sampling ensures faithfully reproduced, high resolution colors. Pixel Level Motion Adaptive Diagonal Interpolation and Noise Reduction ensures high quality de-interlacing of PAL, NTSC and 1080i signals. 3:2 Pull-down ensures proper 24 fps film extraction from NTSC and 1080i sources.

Advanced Features The Key Mode allows one input to be keyed over another. The keyed image may be faded in and out. Due to the 4:4:4 RGB/DVI sampling format, precise keying at the pixel level can be achieved.

The Mix Mode permits Seamless Cut, Fade or Wipe transitions between input sources whilst a background is in use. The Genlock reference input is SD and HD compatible and ensures precise synchronization of the incoming signals by providing a wide Subcarrier lock range with Subcarrier phase adjust.

Integral Audio switching is provided to route audio from the (HDMI-compatible) DVI input or SDI input to the DVI and SDI outputs. An optional Audio Module can provide AES I/O abilities and audio delay and can link to our A2-7300 range of audio break-out units.

With sizes to meet typical screen inventories, FocalPoint is designed for smaller venues than the StageScreen®, breakout rooms, meeting rooms, and other places a fast easy set up is needed. However, the FocalPoint retains the modular frame construction that makes StageScreen so popular.

With frame segments made of sturdy extruded aluminum, the FocalPoint is extremely rigid and durable, while remaining lightweight. With no hinges, the FocalPoint features quick and easy assembly. All available sizes of FocalPoint are built from combinations of the same frame segments in short easy to use lengths. Even legs are constructed using these frame segments.

The modular segments attach quickly, easily and securely end-to-end. Draper’s DuraLoop™ bungees and convenient nylon pull-tabs create a perfectly flat self-centering viewing surface that attaches with no snaps. In addition, a black border extends past the edge of the frame, neatly hiding the DuraLoops and frame posts. Legs and Dress Kits are available. The FocalPoint can also be flown or used to make a custom size screen.

When connected to the ATCS-M60 delegate unit, the ATCS-V60’s five button configuration offers versatile voting options. In addition to straightforward Yes/No and Yes/No/Abstain votes, the unit can be programmed to allow up to five options, a useful feature in situations where multiple candidates are standing for election for example. Up to 150 voters can be handled by an ATCS-60 system using ATCS-V60 modules.

Increasing the usability and cost-effectiveness of the voting unit, Audio-Technica’s ATCS-60 system software directly stores the result of every poll in a conference protocol file. For extended documentation, the results can be exported to a CSV file for use in Microsoft Excel, Open Office etc.